With: Dan Chen
Overview:
We continued the measurement of the high-power coil driver for MN and IM.
Detail:
We measured the transfer function of H1-H3 and V1-V3 coil drivers for IM and MN.
All transfer functions were measured in four different states:
- state1: low-pass filters off
- state2: 1st stage LPF is on
- state3: 1st and 2nd stage LPFs are on
- state4: 1st, 2nd, and 3rd stage LPFs are on.
The measured data will be uploaded to the CAL wiki.
Note: We left our setup next to the rack as we will measure the TM coil drivers transfer function and anti-imaging filters this Friday.