We moved the pico motor drivers for the POP-POM to a mini-rack on the second floor.
At the same time, we changed the connection to the pico network and added a rebooter.
*To be precise, we assigned the pico motor driver for POP2, which was already installed in the mini-rack, for POP-POM and removed the old driver.
The IP addresses of the POP and POP-POM pico motor drivers and rebooters after the work was done are as follows
POP Pico Motor Driver : 10.68.160.76
POP-POM Pico Motor Driver : 10.68.160.77
POP&POP-POM Pico Rebooter : 10.68.160.120
The 2 channels (pitch and yaw) on the vacuum side are online, but the 2 channels (pitch and yaw) on the atmospheric side are not connected, and there is a connector on the top panel of the POP optical table.
Please connect them when necessary.
(or ask me to connect them).
