Routine confirmation of DGS maintenance day(Sep.3)

Performed routine check of DGS maintenance day.
No problems other than known problems.

Stepper motor
 [Checked]
  Checked if the power supply can be controlled by BIO.
  Checked if Script can be started.
  Check that the limit switch installed is green.
 [Check result]
　ETMY:
　 Power control: No problem
　 Limit SW: currently all NG, but will be adjusted in the future (known)

　ITMY:
　 Power control: No problem
　 Limit SW: F0YAW is NG (known)

　Other than above: No problem

Release Sensor
 [Confirmation]
 Confirmed that Release Sensor is 0. 1: Seated
 [Check result]
 ETMY, ITMX, ITMY : No problem
 ETMX_F1_1 : Abnormal, no other problems (known)