I offloaded the F1 and F2 GAS filters with the FRs.

I offloaded the F0 GAS with the FR.

I offloaded the F0 and F1 GAS filters with the FRs. The following updates were accepted.
 

k1 STEPPER

K1:STEPPER-ITMX_GAS_0_ACTUAL_POSITION

K1:STEPPER-ITMX_GAS_0_TARGET_POSITION

K1:STEPPER-ITMX_GAS_1_ACTUAL_POSITION

K1:STEPPER-ITMX_GAS_1_TARGET_POSITION

These values are the stepper motor positions changed to offload the GAS filters.

I offloaded the F0, F1, F2, and BF GAS filters with the FRs.

I offloaded the F0 and F2 GAS filters with the FRs.

I offloaded the F1 and F3 GAS filters with the FRs.

I offloaded the F2 and BF GAS filters with the FRs.

I offloaded the F1 and F2 GAS filters with the FR. The standalone stepper motor driver for the F3 GAS didn't work. 

YamaT-san, Nakagaki-san, Ikeda

> The standalone stepper motor driver for the F3 GAS didn't work. 
We migrated from k1script1 to k1script0 (K-Log #36747), but due to the same issue described in K-Log#36803, we are unable to establish a connection.
As a temporary workaround, the Standalone (IX) stepper motor has been moved to k1script1, and the configuration has been modified so that it can operate there.

I offloaded the F3 GAS with the FR using the standalone stepper driver.