Reports 1-1 of 1 Clear search Modify search
AOS (Optical Levers)
simon.zeidler - 17:52 Monday 26 March 2018 (4542) Print this report
OpLev and TMS in X-end

Akutsu-san, Simon

  • I brought some M6x15 and M6x20 screws, a five-pack of dog-clamps (for the QPD stages), and a QPD circuit (036) to the X-end
    [I actually wonder what happened to the 12 M6x16 screws that I brougth to X-end a few weeks ago... ]
  • wiped the remaining parts for the LS-OpLev and set up the lens-holder (with lens)
  • Two other post-holders with posts are assembled and left on a table inside the clean booth
  • I realized that I forgot to bring the 1" mirror holders for the LS-OpLev. So later, when I came back to the center, I gathered them and stored them inside the AOS shelf. I will bring them to the X-end tomorrow.

In addition to the OpLev stuff, we built up a shelf for the TMS clean booth today.

Comments to this report:
tomotada.akutsu - 22:54 Monday 26 March 2018 (4548) Print this report

It's a backword record: on 23 March 2018.

At around EXC, I've fixed breadboards on the pylons, and put some optical parts, including a QPD circuit #007. I've checked the light source can emit light.

Images attached to this comment
Search Help
×

Warning

×