Reports 1-1 of 1 Clear search Modify search
PEM (Center)
takaaki.yokozawa - 10:16 Friday 06 March 2026 (36509) Print this report
Test for the new data logger (ADiCO QR001) and setup the portable seismometer system
In FY2025, the PEM team bought the new data logger, mainly for the measurement of the seismic motion.
With several test, we succeeded to take the data and showed the spectrum as shown in Fig.1. (ground motion at the 2nd floor of the Hokubu-kaikan)

So, we can take the ground motion using this portable system in future. (But we need the GPS signal, we cannot take data inside the mine)
If you have interested in the ground motion (ex. atotsu entrance, new laser room, experimental room in your laboratory) please contact to me.

Next step, now we used the AC power supply and DC power supply(pm 15V), but we may possible to change to the battery (12V) operation.
We will make the connector to take the three axis seismometer + microphone (or accelerometer)
Images attached to this report
Search Help
×

Warning

×