I took the TCam photos for commissioning at 08:56 ~ 09:06 this morning. The previous work is klog. 

• ETMX
  • original
  • fitting result
  • previous reference
• ETMY
  • original
  • fitting result
  • previous reference
• ITMY
  • original
  • fitting result
  • previous reference
• For these mirrors, I updated the reference positions. I also re-draw the yellow line shown at the k1mon4. For the other mirrors, we don't need to update the reference positions.

During the work, I found that the internal color setting to take photos by Planetary Imager for four TCams was set as Raw 8bit. So, I changed it to RGB24 manually. I'm not sure why this setting was changed.