Reports 1-1 of 1 Clear search Modify search
CAL (YPcal)
dan.chen - 15:11 Thursday 24 July 2025 (34649) Print this report
YPcal calibration

With Marco Meyer-Conde

We performed monthly Pcal-Y calibration on.

After the calibration, we updated EPICS parameters related to the Pcal-X system.
No issues were found.

EPICS Key Before After
K1:CAL-PCAL_EY_1_PD_BG_TX_V_SET 0.01483 0.02303
K1:CAL-PCAL_EY_2_PD_BG_TX_V_SET 0.01734 0.02570
K1:CAL-PCAL_EY_1_PD_BG_RX_V_SET -0.00483 -0.00484
K1:CAL-PCAL_EY_1_OE_T_SET 0.99071 0.99060
K1:CAL-PCAL_EY_1_OE_R_SET 0.99071 0.99060
K1:CAL-PCAL_EY_2_OE_T_SET 0.98628 0.98549
K1:CAL-PCAL_EY_2_OE_R_SET 0.98628 0.98549
K1:CAL-PCAL_EY_1_RX_V_R_SET 0.50339 0.50315
K1:CAL-PCAL_EY_2_RX_V_R_SET 0.49661 0.49685
K1:CAL-PCAL_EY_WSK_PER_TX1_SET 0.33224 0.33262
K1:CAL-PCAL_EY_WSK_PER_TX2_SET 0.89637 0.89862
K1:CAL-PCAL_EY_WSK_PER_RX_SET 1.84301 1.84186
K1:CAL-PCAL_EY_2_INJ_V_GAIN 0.51710 0.51566
Images attached to this report
Non-image files attached to this report
Comments to this report:
dan.chen - 16:26 Thursday 24 July 2025 (34654) Print this report

Detailed memo including time stamp (written by Marco-san)

Plan:

  • Get back the materials for the Y-end measurement
  • Make Y-end measurement

 

8:40 Arriving on site

9:00-9:14 Daily meeting

 

9:20 Entering the central 

9:25 Entering Y tunnel with the necessary materials

9:32 Phone call 

9:40 Arriving at Y-end

9:48 Dressed and ready to work

9:50 Dan is again making suspicious bips in the back !

          The working space is good for one person

 

12:36 Starting last measurement

12:42 Pcal Y calibration is finished

12:45 Starting the computation script

12:50 Leaving the Y-end area

13:10 Arriving at central area

          Checking the results

13:40 Leaving the area

Back to Mozumi 

Search Help
×

Warning

×