[Ushiba-san, Sato-san, Hirata]
We measured DAC noise for TM, IM on BS.
We connected whitening filter between DAC and ADC and measured TM_AIout, IMH_AIout, IMV_AIout. After that we connected whitening filter to the TM satellite box inside cleanbooth and measured TM_COILout_dw0, dw1, dw2 and dw3.
Measured results are attached.
Measurering data are under /users/DGS/measurements/DAC/k1bs .
According to the measurement by AEL groups, ch3 of whitening filter we used was broken unfortunately and 1st whitening filter (#7 bit) was always on during the measurement.
So, we need to compesate the whitening filter effect (z:1, p:10) from the measurement of CH11.
[Fabian, Sato-san, Hirata]
We measured DAC noise for IM on BS.
We connected whitening filter to the IMV and IMH satellite box inside cleanbooth and measured IMV_COILout_dw0, dw1, dw2, dw3, IMH_COILout_dw1 dw2, dw3.
We finished measurement for BS.
Measured results are attached.
Measurering data are under /users/DGS/measurements/DAC/k1bs .
