First, I connected the D-sub cable to cryocon which was placed behind of the PSL room.
Next, I performed the cabling with the almost same place of the ondotori-pt100 (Fig.1.)
- The position of the PT01(new) is very preliminary and after removing the PT01(old), we will replace it.
- I didn't know what is the material on the PT04(old), I didn't touch it at this time
- PT06 is placed temporary
I will try to record to KAGRA system soon.
The "old" PT04 might be set with a high-precision thermometer by Miyoki-san???
With the help of them, we can set the epics channel for new PT100-cryocon temperature monitor at PSL room.
Also we started the script to put the value to epics channel via crontab (Similar system with cryo monitors)
Channel names are
K1:PEM-TEMPERATURE_TABLE_PSL_PT01
K1:PEM-TEMPERATURE_TABLE_PSL_PT02
K1:PEM-TEMPERATURE_TABLE_PSL_PT03
K1:PEM-TEMPERATURE_TABLE_PSL_PT04
K1:PEM-TEMPERATURE_TABLE_PSL_PT05
K1:PEM-TEMPERATURE_TABLE_PSL_PT06
Additional Information
K1:PEM-TEMPERATURE_TABLE_PSL_PT{01,02,03,04,05,06} adds EPICS channel to k1sdfmanage.
