Reports 1-1 of 1 Clear search Modify search
fabian.arellano - 20:07 Tuesday 02 February 2021 (15885) Print this report
Comment to Gluing the mirror wire. (15844)

With Hirata-san.

See pictures in album PR3 Remedying Work.

The adhesive cured well, so we put the front ring of the RM back in place and released the payload. 

Then we turned the oplev laser level on and checked the position of the reflected beam on the ruler. It was 87.5 mm as shown in this picture.

I'll report in another entry by how much we disturbed the pitch. 

Search Help