Added MN/PF OpLev to k1visitmxp's Model file.
I haven't confirmed the operation yet.
I will check the operation tomorrow.
I will describe the added channels in detail tomorrow.
K :VIS-ITMX_PF_OPLEV_{TILT,LEN}_{SEG1,SEG2,SEG3,SEG4}
K :VIS-ITMX_MN_OPLEV_{TILT,LEN,ROL,TRA,VER}_{SEG1,SEG2,SEG3,SEG4}
etc.
I checked the EPICS channel of OpLev.
Select Optic:ITMX-PF/MN, IM/TM in sitemap-VIS-VIS_OVERVIEW
K1:VIS-ITMX_{PF,MN}_OPLEV_{TILT,LEN}_{SEG1,SEG2,SEG3,SEG4}_INMON
K1:VIS-ITMX_{PF,MN}_OPLEV_{TILT,LEN}_{SEG1,SEG2,SEG3,SEG4}_OUTPUT
K1:VIS-ITMX_{PF,MN}_OPLEV_{TILT,LEN}_{PIT,YAW,SUM,CRS}_OUTPUT
K1:VIS-ITMX_{PF,MN}_OPLEV_{TILT,LEN}_MTRX_x_x
K1:VIS-ITMX_MN_OPLEV_{ROL,TRA,VER}_{SEG1,SEG2,SEG3,SEG4}_INMON
K1:VIS-ITMX_MN_OPLEV_{ROL,TRA,VER}_{SEG1,SEG2,SEG3,SEG4}_OUTPUT
K1:VIS-ITMX_MN_OPLEV_{ROL,TRA,VER}_{PIT,YAW,SUM,CRS}_OUTPUT
K1:VIS-ITMX_MN_OPLEV_{ROL,TRA,VER}_MTRX_x_x
ETMX and ETMY are also supported by the same OpLev.
The ADC of FLDACC and OpLev were duplicated, so the FLDACC side was corrected.
Changed ADC2_16-18 to ADC0_20,21,22, and used ADC0_3 as ACC_H4_In.
K-Log#16185
I re-built and restarted the Tower and Payload model files for SRM, SR2, SR3, PRM, and PR2, which were touched by the common files in the OpLev addition process.
I changed the LowerLimit of the Saturation block to 10 and updated everything. (Type-A was done yesterday)
Added processing around OPLEV for Type-A(ITMX,ITMY,ETMX,ETMY).
K1:VIS-{ITMX,ITMY,ETMX,ETMY}_MN_OLSENSALIGN_x_x
K1:VIS-{ITMX,ITMY,ETMX,ETMY}_MN_OPLEV2EUL_x_x
K1:VIS-{ITMX,ITMY,ETMX,ETMY}_MN_QPD2EUL_x_x
Fixed ADC connection for PF/MN OpLev. (ITMX, ITMY, ETMX, ETMY)
The connection is adapted from the attachment of K-Log#16173.
The original connection was based on this diagram, but it seems to have been changed to the one before the modification due to a mistake.
GitID: eb34ed890e1fb488dde5bb479e1d8a2f7be9b601
GpsTime: 1303791828
