Support for ETMX

 Replace MN,IM,TM with MN,IM,TM of PAYLOAD_MASTER

 

Model:

 

Modified to use PAYLOAD_MASTER as well as ETMY.

See ETMY for details.

 

To remove WD and DK, set the following values:

 K1:VIS-ETMX_TM_WD_OPLEVAC_RMS_MAX: 0 -> 10000

 K1:VIS-ETMX_IM_WD_OSEMAC_RMS_MAX: 0 -> 10000

 K1:VIS-ETMX_MN_WD_OSEMAC_RMS_MAX: 0 -> 10000

 

The parameters of DITHER were changed to match the original connection as follows

 K1:VIS-SRM_DITHER{P,Y}2EUL_{1,2}_1: {IM,TM}_DTHER_{PIT,YAW}

 Since the combination was connected

 Change K1:VIS-ETMX_DITHER{P,Y}2EUL_{1,2}_1 to 1.0 as well.

 

SDF:

 CHANS NOT FOUND: SDF RESTORE-LOAD

 CHANS NOT INIT: MON(ACCEPT) - CONFIRM 

 SETTINGS DIFFS: K1:VIS-ETMX_MN_COILOUTF_V3 DIFFERNCE:F1 ACCEPT 

 

Foton:

 Please refer to #15662 as it is almost the same as ETMY. 

 

Increase/decrease of EPICS channel :

 Please refer to #15662 as it is almost the same as ETMY.

 

 

k1visetmymon:

 Modify VISMON_MASTER to create TYPEAMON and link to it.

 

k1visetmymon:

 Model:

  k1visetmymon: Fix to link TYPEAMON to VISMON_MASTER

 Remove the following SHMEM

  K1:VIS-ETMX_PREQUA_EXC

 

 Foton:

  Renamed the original file to _beforePAYLOAD_MASTER and left the body almost as it was.

 

 SDF:

  CHANS NOT FOUND: SDF RESTORE-LOAD

  CHANS NOT INIT: MON(ACCEPT) - CONFIRM 

 

k1modaletmy:

 /opt/rtcds/kamioka/k1/target/fb/master

  I commented out the next two lines and did killk1modaletmx.

  /opt/rtcds/kamioka/k1/chans/daq/K1MODALETMX.ini

  /opt/rtcds/kamioka/k1/chans/daq/tpchn?k1modaletmx.par

Support for ETMX
Replace MN,IM,TM with MN,IM,TM of PAYLOAD_MASTER

 

Model:

 

Modified to use PAYLOAD_MASTER as well as ETMY.

See ETMY for details.#15662

 

 K1:VIS-ETMX_TM_WD_OPLEVAC_RMS_MAX: 0 -> 10000
 K1:VIS-ETMX_IM_WD_OSEMAC_RMS_MAX: 0 -> 10000
 K1:VIS-ETMX_MN_WD_OSEMAC_RMS_MAX: 0 -> 10000

 K1:VIS-SRM_DITHER{P,Y}2EUL_{1,2}_1: {IM,TM}_DTHER_{PIT,YAW}

 Since the combination was connected
 Change K1:VIS-ETMX_DITHER{P,Y}2EUL_{1,2}_1 to 1.0 as well.

 CHANS NOT FOUND: SDF RESTORE-LOAD
 CHANS NOT INIT: MON(ACCEPT) - CONFIRM

SETTINGS DIFFS: K1:VIS-ETMX_MN_COILOUTF_V3 DIFFERNCE:F1 ACCEPT

 

Foton:

 

Please refer to #15662 as it is almost the same as ETMY.

 

Increase/decrease of EPICS channel :

 

Please refer to #15662 as it is almost the same as ETMY.

k1visetmymon:

 

Modify VISMON_MASTER to create TYPEAMON and link to it.

 

k1visetmymon:

k1visetmymon: Fix to link TYPEAMON to VISMON_MASTER

K1:VIS-ETMX_PREQUA_EXC

Renamed the original file to _beforePAYLOAD_MASTER and left the body almost as it was.

CHANS NOT FOUND: SDF RESTORE-LOAD
CHANS NOT INIT: MON(ACCEPT) - CONFIRM

 

k1modaletmy:

 

 

I commented out the next two lines and did killk1modaletmx.
/opt/rtcds/kamioka/k1/chans/daq/K1MODALETMX.ini
/opt/rtcds/kamioka/k1/chans/daq/tpchn?k1modaletmx.par