OndotoriのEPICSチャンネルをiocサーバーからモデルファイルに置き換え

OndotoriのEPICS IOCサーバー(rem_ioc)をMATLABのRCGモデルファイルに置き換えました。
rem_iocはモデルファイルが安定して運用できることが確認できるまでは削除せずSTOP状態としました。

作業内容:
・/opt/rtcds/userapps/trunk/
 sys/common/models/SDFEPICS_LIB.mdl
 sys/k1/models/k1sdfmanage.mdl
 新規モデルファイルを追加
　rate=2K, dcuid=126, specific_cpu=5で作成

・masterファイルの修正
 $ target
 $ cd fb
 $ emacs master
 /opt/rtcds/kamioka/k1/chans/daq/K1EDCU_REM.ini
 をコメントアウトに変更

 /opt/rtcds/kamioka/k1/chans/daaq/K1SDFMANAGER.ini
 /opt/rtcds/kamioka/k1/target/dgs/param/tpchn_k1sdfmanage.par
 を追加

・REM IOCサーバーの停止
 $ssh k1script
 $su
 $supervisorctrl にてrem_iocがRUNNINGあることを確認
 $supervisorctrl stop rem_ioc

・モデルファイルのmake、install、起動
 $ ssh k1test0
 $ make k1sdfmanage
 $ make install-k1sdfmanage
 $ startk1sdfmanage

・mx_streamの再起動
 $ ssh k1boot
 $ sudo emacs /diskless/root/etc/rtsystab
 $ ssh k1test0
 $ sudo /etc/init.d/mx_stream restart

SDF:
 SDF SAVE SCREENからEPICS DB TO FILE, SAVE ASを設定してsafe.snap を新規保存
 SDF RESTOREでsafe.snapを読み込み
 K1:PEM-TEMP_NOMINAL_xxxのみ ACCEPT, MON
 K1:PEM-TEMP_NOMINAL_xxx以外は特に何もせず
 
---


Ondotori's EPICS IOC server (rem_ioc) has been replaced with MATLAB's RCG model file.
We did not delete rem_ioc until we could confirm that the model file was stable and operational, and put it in STOP state.

Work contents:
/opt/rtcds/userapps/trunk/
 sys/common/models/SDFEPICS_LIB.mdl
 sys/k1/models/k1sdfmanage.mdl
 Add a new model file
　Created with rate=2K, dcuid=126, specific_cpu=5

Modify the master file
 $ target
 $ cd fb
 $ emacs master
 /opt/rtcds/kamioka/k1/chans/daq/K1EDCU_REM.ini
 change to comment out

 /opt/rtcds/kamioka/k1/chans/daaq/K1SDFMANAGER.ini
 /opt/rtcds/kamioka/k1/target/dgs/param/tpchn_k1sdfmanage.par
 Add the following

Stop the REM IOC server.
 $ssh k1script
 Add $su
 Confirm that rem_ioc is RUNNING in $supervisorctrl
 $supervisorctrl stop rem_ioc

Make, install, and start the model file.
 $ ssh k1test0
 $ make k1sdfmanage
 $ make install-k1sdfmanage
 $ startk1sdfmanage

Restart mx_stream.
 $ ssh k1boot
 $ sudo emacs /diskless/root/etc/rtsystab
 $ ssh k1test0
 $ sudo /etc/init.d/mx_stream restart

SDF:
 From SDF SAVE SCREEN, set EPICS DB TO FILE, SAVE AS and save safe.snap as new
 Load safe.snap in SDF RESTORE
 K1:PEM-TEMP_NOMINAL_xxx only ACCEPT, MON
 Do nothing except K1:PEM-TEMP_NOMINAL_xxx

MEDM:
 sitemap-REM-AleartのK1REM_RB_ALEART.adlの下側に[SDF TABLE]ボタンを追加しました。

---

Ondotori's EPICS IOC server (rem_ioc) has been replaced with MATLAB's RCG model file.
We did not delete rem_ioc until we could confirm that the model file was stable and operational, and put it in STOP state.

Work contents:
/opt/rtcds/userapps/trunk/
 sys/common/models/SDFEPICS_LIB.mdl
 sys/k1/models/k1sdfmanage.mdl
 Add a new model file
　Created with rate=2K, dcuid=126, specific_cpu=5

Modify the master file
 $ target
 $ cd fb
 $ emacs master
 /opt/rtcds/kamioka/k1/chans/daq/K1EDCU_REM.ini
 change to comment out

 /opt/rtcds/kamioka/k1/chans/daaq/K1SDFMANAGER.ini
 /opt/rtcds/kamioka/k1/target/dgs/param/tpchn_k1sdfmanage.par
 Add the following

Stop the REM IOC server.
 Add $ssh k1script
 Add $su
 Confirm that rem_ioc is RUNNING in $supervisorctrl
 Add $ssh k1script Add $su Confirm that rem_ioc is RUNNING in $supervisorctrl stop rem_ioc

Make, install, and start the model file.
 $ ssh k1test0
 $ make k1sdfmanage
 $ make install-k1sdfmanage
 $ startk1sdfmanage

Restart mx_stream.
 $ ssh k1boot
 $ sudo emacs /diskless/root/etc/rtsystab
 $ ssh k1test0
 $ sudo /etc/init.d/mx_stream restart

SDF:
 From SDF SAVE SCREEN, set EPICS DB TO FILE, SAVE AS and save safe.snap as new
 Load safe.snap in SDF RESTORE
 K1:PEM-TEMP_NOMINAL_xxx only ACCEPT, MON
 Do nothing except K1:PEM-TEMP_NOMINAL_xxx

MEDM:
 Added [SDF TABLE] button at the bottom of K1REM_RB_ALEART.adl in sitemap-REM-Aleart.