MODAL削除に関連してk1visetmymonから不要となった処理を削除、同様に不要となったk1modaletmyをkillした
k1visetmymon:
Model:
 DIAG関連を削除して、MN_COILDRV_VMONのみとした

 DIAGを削除するとmakeの時に次のエラーになるのでBSを真似てダミーMON_FIL1,2を追加した
  Need to have at least two filter modules in the model at /opt/rtcds/rtscore/release/src/epics/util/lib/Parser3.pm line 1594.

 次のSHMEMは削除
  K1:VIS-ETMY_PREQUA_EXC

 Foton:
  元のファイルは_beforePAYLOAD_MASTERへ名前を変更して残し、本体はほぼからの状態にした。

 SDF:
  CHANS NOT FOUND: SDF RESTORE-LOAD
  CHANS NOT INIT: MON(ACCEPT) - CONFIRM 

k1modaletmy:
 /opt/rtcds/kamioka/k1/target/fb/master
  次の２行をコメントアウトしてkillk1modaletmyを行った。
  /opt/rtcds/kamioka/k1/chans/daq/K1MODALETMY.ini
  /opt/rtcds/kamioka/k1/chans/daq/tpchn?k1modaletmy.par

---

Removed unneeded processes from k1visetmymon related to MODAL deletion, and killed k1modaletmy which is no longer needed as well.
k1visetmymon:
Model:
 Removed DIAG-related processes and made MN_COILDRV_VMON only.

 If I remove DIAG, I get the following error on make, so I imitated BS and added dummy MON_FIL1,2.
  Need to have at least two filter modules in the model at /opt/rtcds/rtscore/release/src/e@pics/util/lib/Parser3.pm line 1594.

 Remove the following SHMEM
  K1:VIS-ETMY_PREQUA_EXC

 Foton:
  The original file was left renamed to _beforePAYLOAD_MASTER, and the main body was left almost as it was.
  
 SDF:
  CHANS NOT FOUND: SDF RESTORE-LOAD
  CHANS NOT INIT: MON(ACCEPT) - CONFIRM 

k1modaletmy:
 /opt/rtcds/kamioka/k1/target/fb/master
  I commented out the next two lines and did a killk1modaletmy.
  /opt/rtcds/kamioka/k1/chans/daq/K1MODALETMY.ini
  /opt/rtcds/kamioka/k1/chans/daq/tpchn?k1modaletmy.par