• Input signal: 4.86 Vpp at 10 kHz.
• The input gain is the ratio of the amplitude measured at the probe point over the amplitude of the reference signal.
• For some devices the phase was set to zero by visual inspection using an oscilloscope.
• Phase measurements were recorded in photos which are uploaded to NAOJ's Google Photos.

LVDT	Input gain	Output gain resistance (Ohm)	Phase (µs)	Board and probe point
BF	0.975	57.1	21, signal ahead	left board, P0
SF	0.977	57.5	20, signal ahead	left, P1
F0	0.975	Yet to be set	zero	left, P2
IP #1	0.975	Yet to be set	zero	right, P0
IP #2	0.975	Yet to be set	zero	right, P1
IP #3	0.971	Yet to be set	zero	right, P2