[Ohishi, Kokeyama]

IMMT1 mirror was released by Ohishi-san and aligned towards IMMT2.

In klog 3424, the IMMT1 base was aligned to IMMT2 with mirror fixed with earthquake stops. This time Ohishi-san released the mirror. The angle of the mirror was misaligned and pico motor screw range was not enough to compensate. The mirror was fixed again and the base plate was moved again by hands. Then the mirror was released and aligned again with some subtle adjustments by Ohishi-san. After all the pointing towards IMMT2 went good. The relative distances between coils and magnets seemed OK.