[Takahashi, Ishizaki, Sato, Okutomi]

Height adjustment of the Release Sensors and the BF GAS keystone

• We adjusted height of the Release Sensors to 8.5 mm (+3.5 mm by sims)
• We adjusted height of the keystone of the BF GAS to 68.5 mm (+1 mm from optimal height) when the DP is sitting
  • To let the DP be freely-suspended, we should lift the BF body by 2 mm
• We replaced stop screws on the EQ-stop to M10x200 full-threaded ones

Cable assembling

• We made connecting cables for the GAS LVDT and the picomotor on the BF

Photos >>> https://goo.gl/photos/EvNwn56zBkaxJV8L8