[Takahashi, Ishizaki, Shindo, Sawada, Okutomi]

What we did:

• Cone bellows at the feet of the Pre-isolator are set
• End plate of the EQ stop is assembled on a table, on which the dummy payload will sit
• Pre-assembling of the BF damper is ongoing
  • Glue on the coil bobbins got hard and the coil wires are now securely fixed to the bobbins
  • Primary coils and magnets are assembled

Photos >>> https://goo.gl/photos/kfqu5N1p4aDVv7eN7