[Takahashi, Ishizaki, Shindo, Okutomi]

Shindo-san from Mirapro joined!!

The EYV chamber opened

• The vertical hole to the EYC cryostat is exposed (see attached photo)
• The mashroom head of the chamber is put on a palette and carried behind the hole
• We covered the chamber with transparent sheets
• During this work, one nut dropped into the gap of hole to the colagte duct
  • We covered the base of the chamber to avoid more falling accidents
  • The nut is found and returned to the EYV room

BF damper pre-assembling

• Ongoing
• Some glues to fix coil wires to the bobbin are easily dettached
  • I did additional gluing on them
• One vertical and one horizontal secondary coil is assembled
• The wire of coils is not connected to some connectors
  • We have to add additional cable and connect to D-sub connectors

Photos >>> https://goo.gl/photos/B3Te6Cxv5A4tj6229