Reports 1-1 of 1 Clear search Modify search
VIS (IY)
koji.nakagaki - 17:50 Tuesday 20 July 2021 (17602) Print this report
Rebooter installation for pico motor drivers. (ITMY)
I did a rebooter install to the ITMY pico motor driver.

At the same time, I moved the pico motor driver that was placed next to the chamber to the mini rack.
For this task, I added a 3m Dsub cable between the pico motor driver and the chamber.

The IP address of the rebooter I installed is as follows
ITMY Pico Rebooter : 10.68.150.115

*The installation was done on the existing network because the location does not have a new pico network (10.68.160.x).

Images attached to this report
Search Help
×

Warning

×