Reports 1-1 of 1 Clear search Modify search
VIS (PRM)
koji.nakagaki - 18:36 Monday 19 July 2021 (17584) Print this report
Rebooter installation and network changes for pico motor drivers. (PRM)
I did a rebooter install and network changes against the PRM pico motor driver.
At the same time, each device was fixed to the rack tray.

The IP address of the installed rebooter is as follows.
PRM Pico Rebooter : 10.68.160.107

The IP address of the pico motor driver has been changed as follows.
PRM-IM : 10.68.150.9 -> 10.68.160.9
PRM-BF : 10.68.150.8 -> 10.68.160.8
Images attached to this report
Search Help
×

Warning

×