Log on 2021.7.8  (Sorry for the late report.)

with Nakagaki-san and Sugiyama-san

1. dial gauge installation

Three dial gauges were installed under the top chamber in preparation for replacing the top chamber support bracket.

2. Pico motor cable extension test

In order to store the Pico Motor Driver in the rack, it is necessary to extend the cable.
We conducted a test to see how long the cable could be extended.
As a result, even if we extend the cable by 10m from the current state, it will not affect the Pico Motor drive.

We used BF's pico motor for Yaw adjustment to check the operation.

Translated with www.DeepL.com/Translator (free version)