[Takahashi, Sato]
- The primary coil of BF LVDT was touching the secondary coil. Adjusted the position of secondary coil.
- Pulled up the additional spring on the BF. The BF keystone went to 68mm (2900count) in height.
- The cable for the TF LVDT was disconnected in the Dsub connector on the IP. It was recovered.
- Adjusted the ballasts on the TF. Two rectangular blocks of 1.8kg were removed and small disks of total 0.2kg were added. The TF keystone went to -16mm in height.
- Adjusted the yaw FR so that the primary coils of BF damper can part from the secondary coils.
- Released the IP. Closed the top chamber.