[Takahashi, Sato]

1. Replaced the cone bellows. It was necessary to remove the piston head temporaly. One of three has been done by Horiuchi-san on 26th.
2. Lifted down the EQ stop. The F1 stage was put on the frame lock.
3. Extended the EQ stop to the top ring.
4. Lifted down the EQ stop so as to access the BF. We could not put the top ring on the frame lock due to the wire for the cryo-payload.
5. Checked the conectability of BF-LV line. #3-8, #4-9 pins were not available. The terminator was connected to the BF-DCPV line to employ the empty pins.
6. Lifted up the EQ stop. The F1 stage was put on the frame lock.