Installed new models to MCI, MCE, MCO, IMMT1 and IMMT2 and rebooted.

Foton:
{MCI,MCE,MCO,IMMT1,IMMT2}_TM_OPLEV_{PIT,YAW} -> MCI_TM_OPLEV_TILT_{PIT,YAW}
{MCI,MCE,MCO,IMMT1,IMMT2}_TM_WD_OSEMAC_BANDLIM_{H1,H2,H3,H4} -> MCI_TM_WD_OPLEVAC_BANDLIM_{TILT_SEG1,TILT_SEG2,TILT_SEG3,TILT_SEG4}

Only MCI has been implemented.
Others are still being worked on.

SDF:
New channel is set to MON.
The following values were transferred from safe.snap of the previous model before the change.
　K1:VIS-{MCI,MCE,MCO,IMMT1,IMMT2}_TM_WD_OPLEV_TILT_{PIT,YAW}_GAIN
　From the previous safe.snap
　The value of K1:VIS-{MCI,MCE,MCO,IMMT1,IMMT2}_TM_WD_OPLEV_{PIT,YAW}_GAIN is set.
 

DACKILL_TYPEC->PAY_SHUTDOWN_TRIGへ名称変更
 FLAG0とTM_WDBLOCKFLAG_Inのピン配置を接続に合わせて入れ替え
DACKILLー>PAY_DACKILへ名称変更

SDF:
　K1:VIS-{MCI,MCE,MCO,IMMT1,IMMT2}_PAY_DACKKILLをACCEPT&MON
　K1:VIS-{MCI,MCE,MCO,IMMT1,IMMT2}_PAY_SHUTDOWN_RAMPTにType-Aに合わせて5secを設定

Foton:
 K1VISMCE.txt
 MCE_TM_LKIN_P_DEMOD_{I,SIG} -> MCE_LKIN_P_DEMOD_{I,SIG}
 MCE_TM_LKIN_Y_DEMOD_{I,Q,SIG} -> MCE_LKIN_Y_DEMOD_{I,Q,SIG}

 MCE_TM_OPLEV_PIT -> MCE_TM_OPLEV_TILT_PIT
 MCE_TM_OPLEV_{SEG1,SEG2,SEG3,SEG4} -> MCE_TM_OPLEV_TILT_{SEG1,SEG2,SEG3,SEG4}
 MCE_TM_WD_OSEMAC_BANDLIM_{H1,H2,H3,H4} -> MCE_TM_WD_OPLEVAC_BANDLIM_{TILT_SEG1,TILT_SEG2,TILT_SEG3,TILT_SEG4}

K1VISMCO.txt
 MCO_TM_OPLEV_{PIT,YAW} -> MCO_TM_OPLEV_TILT_{PIT,YAW}
 MCO_TM_WD_OSEMAC_BANDLIM_{H1,H2,H3,H4} -> MCO_TM_WD_OPLEVAC_BANDLIM_{TILT_SEG1,TILT_SEG2,TILT_SEG3,TILT_SEG4}

K1VISIMMT1.txt
 IMMT1_TM_OLDCCTRL_{P,Y} -> 削除

K1VISIMMT2.txt
 IMMT2_TM_OLDCCTRL_{P,Y}-> 削除
Changed the name from DACKILL_TYPEC->PAY_SHUTDOWN_TRIG
 Changed the pin assignment of FLAG0 and TM_WDBLOCKFLAG_In to match the connection
Renamed to DACKILL->PAY_DACKIL

SDF:
　K1:VIS-{MCI,MCE,MCO,IMMT1,IMMT2}_PAY_DACKKILL is ACCEPT&MON
　Set K1:VIS-{MCI,MCE,MCO,IMMT1,IMMT2}_PAY_SHUTDOWN_RAMPT to 5sec to match Type-A.

Foton:
 K1VISMCE.txt
 MCE_TM_LKIN_P_DEMOD_{I,SIG} -> MCE_LKIN_P_DEMOD_{I,SIG}
 MCE_TM_LKIN_Y_DEMOD_{I,Q,SIG} -> MCE_LKIN_Y_DEMOD_{I,Q,SIG}

 MCE_TM_OPLEV_PIT -> MCE_TM_OPLEV_TILT_PIT
 MCE_TM_OPLEV_{SEG1,SEG2,SEG3,SEG4} -> MCE_TM_OPLEV_TILT_{SEG1,SEG2,SEG3,SEG4}
 MCE_TM_WD_OSEMAC_BANDLIM_{H1,H2,H3,H4} -> MCE_TM_WD_OPLEVAC_BANDLIM_{TILT_SEG1,TILT_SEG2,TILT_SEG3,TILT_SEG4}

K1VISMCO.txt
 MCO_TM_OPLEV_{PIT,YAW} -> MCO_TM_OPLEV_TILT_{PIT,YAW}
 MCO_TM_WD_OSEMAC_BANDLIM_{H1,H2,H3,H4} -> MCO_TM_WD_OPLEVAC_BANDLIM_{TILT_SEG1,TILT_SEG2,TILT_SEG3,TILT_SEG4}

K1VISIMMT1.txt
 IMMT1_TM_OLDCCTRL_{P,Y} -> delete

K1VISIMMT2.txt
 IMMT2_TM_OLDCCTRL_{P,Y}-> delete