IOO (General)takahiro.yamamoto - 19:46 Friday 05 March 2021 (16172)
Print this reportPMC lock was recovered[Akutsu, Oshino, Yamamoto, with Kenta (remote)]
PMC lock was recovered with guardian. But we suspended to output laser to IMC today because of the trouble on DGS workstation.
----- At first, we tried to lock PMC with IO guardian. But it didn't works well. (stopped READY state.) After then, we can lock PMC with unmanned-mode of PMC guardian.
For reducing input power of IMC, we try to use HWP at PSL but it cannot be used because of the trouble on the DGS workstation. - Network for k1ctr12 must be recovered. - k1ctr12 cannot be booted up with HDMI-VGA connector. (I unplugged it.) - One USB extender is maybe broken. (We cannot use mouse and keyboard at the same time on k1ctr12.)
Comments to this report:
takahiro.yamamoto - 1:05 Saturday 06 March 2021 (16175)
Print this reportI requested DOWN for PMC guardian because temperature servo is not stable. Until cooling down PMC, I'll keep down state.