As part of preparation for remedying work I checked the health of BF and F1 fishing rods:
- BF: it seems completely healthy.
- F1: I was able to move it down to ~230 um from around 488 um.
- Temperature: 24.1 degrees.
Therefore, I changed the setpoint in F1 to 230 um. The BS is flat so the change should not have any effect on the IFO.
Long ago I was ony able to move F1 keystone down to around 488 um, but the temperature was higher back then. Now the temperature is 24.1 degrees.
I took a "GAS setpoints snapshot" for Type-B Gurdian and updated the ALIGNED, MISALIGNED and SAFE SDF values.