[Michimura, Miyamoto, Komori]

Arrangement around IOO we did today is as follows.

• Four Dsub 9pin cables for RF PD of IMC REFL, whose length was 2m, were changed to one 10m cable.
• The coil drivers for MCE, MCI, and MCO are placed on a duckboard.
• The wiring behind IOO rack is arranged.
• Terminating resistors are inserted to RF distributor ports we don't use.
• SMA connectors are tightened by using a wrench.
• The BNC cable for BS_PDA1_DC is collected.
• The Dsub-BNC chassis is used at REFL_PDA1_DC PD instead of handmade Dsub-BNC.